CNC Tiny Turning Parts and Tubes - UNISON TEK CO., LTD.

Copper Tiny(Small) Turning Parts and Tubes

Our engineers can tackle your tiny(small) parts(tooling part) machining needs with ease on one of our high-speed CNC machines. These multi-tasking, dual-spindle machines make turning and milling a simple task all in one set-up, shortening your overall cost and lead time. Small machining department in Unison Tek is equipped with multi-pallet capabilities. These machines are versatile enough to be able to set up multiple parts on each side of the tombstone allowing for unmanned operation around the clock. More information about turning parts

The following is the data table of dimension of cnc tiny(small) turning parts:

Straightening Tube	Range	Tolerance
Outside Diameter	0.3-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-4.0mm	±0.02mm(standard)
Wall thickness	0.05-0.8mm	±0.01mm
Cutting length	4-150mm	±0.1mm
	150-1000mm	±0.5mm
	1000-2500mm	±2.0mm

Tube in coils	Range	Tolerance
Outside Diameter	0.2-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-6.0mm	±0.05mm(standard)
Wall thickness	0.05-0.8mm	±0.01mm
Coil Diameter	450,650 mm	Special case can be changed after discussion
Coil weight	5-20kg	Special case can be changed after discussion

Brass Tubes

Straightening tube	Range	Tolerance
Outside Diameter	0.15-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-3.0 mm	±0.01mm(standard)
Wall thickness	0.05-0.4mm	±0.01mm
Cutting length	4-150mm	±0.1mm
	150-1000mm	±0.5mm
	1000-2500mm	±2.0mm

Tube in coils	Range	Tolerance
Outside Diameter	0.15-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-4.0mm	±0.05mm(standard)
Wall thickness	0.05-0.8mm	±0.01mm
Coil Diameter	450,650 mm	Special case can be changed after discussion
Coil weight	5-20kg	Special case can be changed after discussion

Bronze Tubes

Straightening tube	Range	Tolerance
Outside Diameter	0.15-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-3.0mm	±0.01mm(standard)
Wall thickness	0.03-0.3mm	±0.01mm
Cutting length	4-150mm	±0.1mm
	150-1000mm	±0.5mm
	1000-2500mm	±2.0mm

Tube in coils	Range	Tolerance
Outside Diameter	0.15-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-3.0mm	±0.05mm(standard)
Wall thickness	0.03-0.3mm	±0.01mm
Coil Diameter	450-650mm	Special case can be changed after discussion
Coil weight	5-20kg	Special case can be changed after discussion

EDM Tubes

Application:spark-erosion electrodes, Range : Outer diameter 0.15-1.50mm.

Outer Diameter(mm)	Tolerances	Length(mm)	Material
0.15	+0/ -0.01	200	Brass/Copper
0.20		200	Brass/Copper
0.25		200	Brass/Copper
0.30		300/400	Brass/Copper
0.40		300/400	Brass/Copper
0.50	+0/ -0.02	300/400	Brass/Copper
0.60		300/400	Brass/Copper
0.70		300/400	Brass/Copper
0.80		300/400	Brass/Copper
0.90		300/400	Brass/Copper
1.00		300/400	Brass/Copper
1.10	+0/ -0.02	300/400	Brass/Copper
1.20		300/400	Brass/Copper
1.30		300/400	Brass/Copper
1.40		300/400	Brass/Copper
1.50		300/400	Brass/Copper

More Products Information

Please visit CNC Milling Parts, Stamping Parts, CNC Machining Service in Taiwan, Technical Data for your reference and Quality Inspection to get more information about our products, if you are interested in any kind of products, please e-mail to Harry Yen hyen@unisontek.com.tw to get a free quote.

Alloy and Application

Material	Standard			Nominal chemical composition %	Density
Material	JIS	DIN	EN	Nominal chemical composition %	Density
Austenitic stainless steels	SUS304	1.4301	AISI 304	Fe:72 Ni:8.5-10 Cr:17-21 C＜0.07	7.90
Austenitic stainless steels	SUS316L	1.4404 1.4435	AISI316L	Fe:68 Ni:11-14 Cr:16.5-18.5 Mo:2.5-3 C＜0.03	7.90

Production Range

Straightening tube	Range	Tolerance
Outside Diameter	0.3-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-5.0mm	±0.02mm(standard)
Wall thickness	0.07-0.4mm	±0.01mm
Fixed length	4-150mm	±0.1mm
	150-1000mm	±0.5mm
	1000-2500mm	±2.0mm

Straightening tube	Range	Tolerance
Outside Diameter	0.3-2.0mm	±0.01mm(standard)
Outside Diameter	2.01-5.0mm	±0.05mm(standard)
Wall thickness	0.07-0.4mm	±0.01mm
Coil Diameter	450,650 mm	Special case can be changed after discussion
Coil weight	5-20kg	Special case can be changed after discussion

USB TYPE-C Hulled

Metal	Size	Cut For Length
SUS 304 / 316L	*8.252.4**	Customer need

More Facility Information

Unison Tek Co., Ltd. cointinued to grow a scalable company in Taiwan, and our goal is to serve all the people and clients who need oem machined metal parts. With professional engineering team, our team could reach your goal and reply to you with feedback in two working days. We highly welcome you to visit Machined Parts, Facility, Service, Material to get more information about our facility, if you are interested in any kind of products, please e-mail to Harry Yen hyen@unisontek.com.tw to get a free quote. Our engineering team will reply to you with useful feedback in two working days. All of us are looking forward to your news and invite you to visit our factory in Taiwan. Welcome to send any inquiry to us!