Machine tools

There are many metal cutting machine tools in the field of metal  processing, following table just names a few common tools.

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years.

In addition, please visit CNC Turning Parts, Machined Part, Stamping Parts, Technical Data for your reference and Quality Inspection to get more information about us, if you have any question,
We will please mail to Harry Yen hyen@unisontek.com.tw CNC machining parts for you.

Please watch our introduction and company on YouTube channel Link

Introduction of Innovative Technology

Unison Tek is ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years.

Please get a free Quote from Harry Yen hyen@unisontek.com.tw Please visit our Machined Parts, CNC Machining, Service and Quality Inspection to get more information about us.

All of us are looking forward to your good news and invite you to visit our cnc machining factory in Taiwan. Welcome to send any inquiry to us, and we’re ready to make high precision machined part for you.

Please watch our company channel on YouTube

Anodisation Process

As an OEM/custom machined metal parts manufacturer, Unison Tek is not just experienced in the turning and milling process, but also have had affiliated companies who can take care of different surface treatments for us – anodisation.

For example, it is a process that’s being heavily used on our machined parts.

What is anodisation?

Anodizing is an electrolyticpassivation process used to increase the thickness of the natural oxidelayer on the surface of metal parts.

The process is called anodizing because the part to be treated forms the anode electrode of an electrolytic cell. Anodizing increases resistance to corrosion and wear, and provides better adhesion for paint primers and glues than bare metal does.

Anodic films can also be used for a number of cosmetic effects, either with thick porous coatings that can absorb dyes or with thin transparent coatings that add interference effects to reflected light.

Types of anodising

1) Chromic Acid Anodising

Rarely used, but suitable for castings and in situations where a reduction in fatigue strength is not acceptable. Film thicknesses are the thinnest of the three common processes. However, it’s not ideal for when coloring is needed.

2) Sulphuric Acid Anodising

Used in a variety of occations. A range of oxide layer thicknesses can be achieved as can effective colouring, most commonly achieved by the application of a secondary colouring treatment.

Film thicknesses in aluminium are in the range of 5-25 Microns, with 10-15 required for effective colouring using dyes. Coating thicknesses in titanium are significantly less, being in the range of 0.1-0.3Microns.

3) Hard Anodising

Hard Anodising is ultimately is the thickest form of anodising, creating an oxide layer which is between 20-100 Microns thick, depending on the base alloy being treated.

It offers the highest increases in hardness, wear resistance and electrical resistance and is primarily a functional coating.

It is also performed in a sulfuric acid solution, but with higher acid concentration, low temperature and a higher voltage applied.

Case Study: Issues we ran into when anodizing:

-Fixation for anodisation/ jigging marks: It’s prone to corrosion and bruises.

-Blind holes: Electrolyte will not able to get into the blind holes, thus creating uneven appearances.

-Insufficient packaging/ impact while shipping the goods is likely to create marks.

Preventative measures:

• -Reinforce inspection equipment: anodisation thickness testers, durometers,
  salt spray test machine
• -Tapes applied to mask the area while anodising
• -Reinfoce packaging sufficiency

Benefits of Anodizing

• Corrosion resistance: Protects the metal from moisture and chemicals.
• Wear resistance: Increases surface hardness.
• Aesthetic finish: Allows for a matte or colored appearance.
• Environmentally friendly: No heavy metals or toxic by-products.
• Stable surface: Will not peel or chip like paint or plating.

Common Applications

• Consumer electronics (e.g., smartphone casings)
• Architectural components (e.g., window frames)
• Automotive and aerospace parts
• Kitchenware and sports equipment

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years in Taiwan.

Please visit our pages: CNC Turning Parts, Machined Parts, Stamping Parts, CNC Mahining Service, Technical Data and Quality Inspection to get more information about us.

Please get a free quote from Harry Yen hyen@unisontek.com.tw. All of us are looking forward to your comming and invite you to visit our cnc machining factory in Taipei, Taiwan. Our team will reply to you with engineering feedback in two working days.

Please watch our company channel on YouTube and introduction https://www.youtube.com/watch?v=zkOWcfXdx5s

Unison Tek has been growing a scalable company in Taipei Taiwan, and our goal is to serve all the people clients who need oem machined metal parts that made in Taiwan.

Whether you need more information, samples, a quote, or advice for a project, we would be delighted to serve you anytime, our production line is ready to make any parts for you.

The Seamless Supply Chain

We understand what 1 late product means for your production line might cause big problems on your company such as, production downtime, making your end customer unhappy or lost revenue.

Hence, we trust that in giving our customer the right product or parts and shipping out in the right time can be called “The Seamless Supply Chain”.

Unison Tek believe that follow the below three core tenets can build up and even strengthen the seamless supply service.

• Immediately Respond

We provided personalized and seamless responses to today’s digitally connected customer across all channels from e-mails, phone calls and video calls. In addition, we applied the Skype Account online to respond the customers without any time difference.

• Rapid Lead Time

Unison Tek provides 2-3 weeks lead time in machining process. Our organized production line and affiliated suppliers can solve the customers’ urgent lead time.

• High Quality

  To avoid any re-work issue or giving any replacement, we believe that provide our high quality to our customer can help them avoid any unhappy business relationship happened from both their end customers and them,

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years in Taiwan. Please get a quote from Harry Yen hyen@unisontek.com.tw

Please visit CNC Milling Parts, CNC Machined Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen hyen@unisontek.com.tw

We are looking forward to your good news, even invite you to visit our factory in Taiwan. All of us are looking forward to your good news and invite you to visit our cnc machining factory in Taiwan. we’re ready to make high precision machined part for you.

Please watch our company channel on YouTube as follows Link and introduction Link.

Introduction of Engineering Tolerance

Have you ever wondered how parts can fit so well together into a watch, or a smartphone? The key to a good assembly is in the engineering tolerance. Let’s see the tolerance.

Tolerance is defining a range on a dimension or spec that can be allowed. Even using the most precise CNC machine, there will be slight deviations during production.

Creating the tolerance requires in depth knowledge of processing of how the parts inside a system is fitted together.

A very tight tolerance requires precise machines and experienced personnel, and the defect rate could go up, so the pricing will go up as well, and vice versa.

BILATERAL TOLERANCE

When the tolerannce allows both plus and minus range.

UNILATERAL TOLERANCE

When the tolerance only allows either plus or minus number. Aside from geometric tolerance, there are also tolerance for temperature, hardness, pressure… etc.

Unison Tek is ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years in Taiwan Industrial area.

Please visit Machined Parts, CNC Milling Parts, CNC Machined Parts, Stamping Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen hyen@unisontek.com.tw

All of us are looking forward to you voice, even invite you to visit our factory in Taiwan. All of us in Unison Tek are looking forward to you and invite you to visit our cnc machining factory in Taiwan.

Please watch our company channel on YouTube Link.

You could see clearly operator with equipments is checking and inspecting the dimensions of the part. With our much experienced engineering team, our team could reply to you with feedback in two working days.

Advantages of Rapid Prototyping

One of the complex challenges that product designers face, is how to give clients a quick understanding of what the product looks like and how it functions.

Needless to say, rapid prototyping is no doubt a strategic capability. Attempting to be the first to launch a new product gives your company a competitive advantage as it offers a fast and accurate way to know more about the potential of the product.

Rapid prototyping enables your clients or product users to look at and touch the design before they want their orders to be brought in production.

Rapid prototyping is a modern-day technology that serves to demonstrate the precision level of computer modelling, such as CAD, Pro/E …etc to help us move faster to meet our client’s requirements.

Some significant benefits of rapid prototyping include:

1. Basic understanding of design concepts
2. Rapid prototyping in accordance with specific designs
3. Finding out possible design flaws before mass production
4. Cost-effective and time-saving

The application of rapid prototyping in product development is inevitable and will be in widespread use in the industrial filed. In a highly competitive market, this tool takes you a step closer to success in customer relationships.

In addition, please visit Machined Parts, CNC Milling Parts, CNC Machined Parts, Stamping Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen  hyen@unisontek.com.tw

People at Unison Tek are looking forward to your good news and invite you to visit our cnc machining factory in Taiwan. Welcome to send any inquiry to us and have free consaulant with our engineering team.

Whether you need more information, samples, a quote, or advice for a project, we would be delighted to discuss it with you. Please watch our company channel on YouTube Link and introduction Link.

Grinding

There are many forms of grinding, but the four major industrial grinding processes are：

•Cylindrical grinding

A cylindrical grinder is used for shaping the outside of a workpiece. These machines accept workpieces in a variety of shapes as long as they can be rotated through a central axis.

In a cylindrical grinder, both the workpiece and grinding wheel are simultaneously rotated. Outside diameter grinders, internal diameter grinders, and centerless grinders are all types of cylindrical grinders.

•Internal grinding

Internal grinding is used to grind the internal diameter of the workpiece. Tapered holes can be ground with the use of internal grinders that can swivel on the horizontal.

•Centerless grinding

Centerless grinding is when the workpiece is supported by a blade instead of by centers or chucks. Two wheels are used. The larger one is used to grind the surface of the workpiece and the smaller wheel is used to regulate the axial movement of the workpiece.

Types of centerless grinding include through-feed grinding, in-feed/plunge grinding, and internal centerless grinding.

•Surface grinding

Surface grinding uses a rotating abrasive wheel to remove material, creating a flat surface. The tolerances that are normally achieved with grinding are ±2×10−4 inches (5.1 μm) for grinding a flat material and ±3×10−4 inches (7.6 μm) for a parallel surface. Please get a quote from Harry Yen hyen@unisontek.com.tw Our team will reply to you with feedback in two working days.

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years in Taiwan Industrial area.

In addition, please visit Machined Parts, CNC Milling Parts, CNC Machined Parts, Stamping Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen  hyen@unisontek.com.tw

People at Unison Tek are looking forward to your voice, even invite you to visit our factory in Taiwan. Welcome to send any inquiry to us!!

We are looking forward to your good news and invite you to visit our cnc machining factory in Taiwan. Our team will reply to you in 24 hours.

Please watch our company channel on YouTube as follows Link and introduction Link.

Customer Service Satisfied Survey

Last month, we used questionnaire to know how customers feel about service from Unisontek. Finally we made a conclusion, and received many higher compliments and positive feedbacks from our valued customers.  

The following are comments from our customers, just name a few

1. We are very pleased with your performance and would recommend your services to others.

2. Both, pricing and a certain level of quality is vital for us to support competitiveness of our product. It seems that we will achieve a production ready design in a few cycles. Collaboration with UNISON TEK is very pleasant.

3. Unison Tek is a valuable supplier of ours, and has always been great to work with.  Good pricing, reasonable lead times and great support on new projects.  No issues at all…excellent across the board. 

4. In general market, low quantity & ‘1 offs’ prices tend to be higher than UK but larger quantities are competitive. 

5. We are very happy with the quality and efficiency of Unison Tek. The staff always respond in a timely fashion and are very helpful. 

6. Unison Tek Co.Ltd is an excellent supplier of customized metal parts for us. It’s great doing business with you.

7. We are really happy with your service. Thank you very much.

Please get more feedback from Unison Tek’s customers, Testimonials

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years.

Unison Tek is ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years

In addition, please visit Machined Parts, CNC Milling Parts, CNC Machined Parts, Stamping Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen  hyen@unisontek.com.tw

Reading ANSI Tables

How to read the “ANSI tables”, aka “AQL tables”

Source: Mil-Std 105E, replaced by commercial standards:

ISO2859, ANSI/ASQ Z1.4-2003, NF06-022, BS 6001, DIN 40080.

Random Sampling

¤  100% inspection can consume a lot of time, or destructive.

¤  How many should you check?

¤  Follow statistics rather than a fixed percentage

¤  Widely used settings:

¤  Normal severity

¤  Level II

Acceptance Quality Limit (AQL)

¤  How do you decide if the batch is accepted or rejected?

¤  The buyer and the supplier should agree on AQLs.

¤  Widely used settings for consumer goods in China:

¤  0% for critical defects (totally unacceptable: a user might get harmed, or regulations are not respected).

¤  2.5% for major defects (these products would usually not be considered acceptable by the end user).

¤  4.0% for minor defects (there is some departure from specifications, but most users would not mind it).

Example

¤  Order size: 40,000 pcs of memory sticks, to be made in 1 batch by the supplier.

¤  Single sampling plan.

¤  Normal severity, level II.

¤  AQLs: critical 0, major 1.5%, minor 4.0%.

Step 1: The Code Letter

Step 2: Sample Size and AQLs

This Special Case

¤  The ISO2859-1 standard says:

¤  If this procedure leads to different sample sizes for different classes of nonconformities or nonconforming items, the sample size code letter corresponding to the largest sample size derived may be used for all classes of nonconformities or nonconforming items, when designated or approved by the responsible authority.

Conclusion (for Single Plan)

¤  Your code letter is “N”, so you will have to draw 500 pcs randomly from the total lot size.

¤  Here are the limits: the products are accepted if NO critical defects, and NO MORE than 14 major defects, and NO MORE than 21 minor defects are found.

¤  Examples: 

¤  If you find 0 critical defect, 17 major defects and 12 minor defects, the products are rejected. 

¤  If you find 0 critical defect, 10 major defects and 21 minor defects, the products are accepted.

Same Example, Double Plan

¤  For simplicity, let’s only look at major defects.

¤  Code letter is unchanged.

Conclusion (for Double Plan)

¤  1st step: draw 315 samples and check them.

¤  If you find 7 defects or less: the lot is accepted.

¤  If you find 11 defects or more: the lot is rejected.

¤  If you find between 8 and 10 defects: go for 2nd step.

¤  2nd step: draw another 315 samples and check them.

¤  If you find 18 defects or less in total: the lot is accepted.

¤  If you find 19 defects or more in total: the lot is rejected.

Get a Quote from Harry Yen hyen@unisontek.com.tw

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years.

Unison Tek is ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years

In addition, please visit Machined Parts, CNC Milling Parts, CNC Machined Parts, Stamping Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen  hyen@unisontek.com.tw

Metal Parts Manufacturer

As an OEM/custom machined metal parts manufacturer, Unison Tek does not just solve problems for our customers, we go beyond that – we anticipate the issues that our customers might face along the way, and tackle with them before they can even surface.

With decades of experiences in this field, we’ve learned that burr migh get in the way of affecting the quality of the finished products.

The case study below shows one way of effectively deburring/ deflashing the parts using liquid nitrogen.

Liquid nitrogen frozen deflashing machine 

Liquid nitrogen frozen deflashing machine proves to be working well when deflashing the parts, especially for plastic material. It’s a process using liquid nitrogen to freeze processing objects (temperature to be 180 degrees Celsius below zero).

By doing so, the objects will become hard and brittle. Then, we can use plastic sanding material for blasting, in order to reach complete deflashing.

The perks of applying this procedure are numerous. It’s cost-efficient, labour-saving, and unlike traditional deflashing process, it generates productivity and decrease the chance of defect rate.

It’s suitable to put to use for plastic material, rubber, die cast, aluminum alloy, to name just a few.

The sanding material is made from plastic, which can further avoid damaging the surface.

This case is one of many successful examples that we achieved for our customers. And this is what makes this line of business so valuable – we are constantly learning and advancing, along with our customers.

As an OEM/custom machined metal parts manufacturer, Unison Tek does not just solve problems for our customers, we go beyond that – we anticipate the issues that our customers might face along the way, and tackle with them before they can even surface.

With decades of experiences in this field, we’ve learned that burr migh get in the way of affecting the quality of the finished products. The case study below shows one way of effectively deburring/ deflashing the parts using liquid nitrogen.

Liquid nitrogen frozen deflashing machine  

Liquid nitrogen frozen deflashing machine proves to be working well when deflashing the parts, especially for plastic material.

It’s a process using liquid nitrogen to freeze processing objects (temperature to be 180 degrees Celsius below zero).

By doing so, the objects will become hard and brittle. Then, we can use plastic sanding material for blasting, in order to reach complete deflashing.

The perks of applying this procedure are numerous. It’s cost-efficient, labour-saving, and unlike traditional deflashing process, it generates productivity and decrease the chance of defect rate.

It’s suitable to put to use for plastic material, rubber, die cast, aluminum alloy, to name just a few.

The sanding material is made from plastic, which can further avoid damaging the surface.

This case is one of many successful examples that we achieved for our customers. And this is what makes this line of business so valuable – we are constantly learning and advancing, along with our customers.

CNC ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years.

Unison Tek is ISO 9001:2015 Certified Machine Manufacturer in Taiwan for OEM/ODM/Customized machined products for 36 years

In addition, please visit Machined Parts, CNC Milling Parts, CNC Machined Parts, Stamping Parts and Quality Inspection to get more information about us, if you have any question, please e-mail to Harry Yen  hyen@unisontek.com.tw